File 1 1_Tech_specs.pdf

Units, Codes for different markets 1

Technical data 2

Carburettor type, Stromberg 3

Carburettor type, Pierburg 4

Special tools 5

 

File 2 2_description.pdf

Technical description 6

Carburettor (Stromberg) 7

Twin carburettors 8

Pierburg 175 CDUS carburettor 8,9

 

Carburettor design

Auxiliary devices, Float system Stromberg 10,11

Float system Stromberg, Pierburg 12

Cold-start device (choke), Stromberg 13

Operating principle

of the cold-start device(Stromberg) 14

Cold-start device (choke), Pierburg 15

Idling (Stromberg) 16

Acceleration, Normal driving (Stromberg) 17

Idling (Pierburg) 18

Acceleration, Normal driving (Pierburg) 19

Full-load operation (Pierburg),

Engine overrun 20

Engine overrun,

Europe specification (-1984) 21

Engine overrun,

1985 models onwards 22

Idling shut-off valve 23,24

Air cleaner, Air preheating 25

Fuel pump 26

Fuel tank, fuel lines, ovefill protection 27,28

Roll-over valve 29

File 3 3_Stromberg_single.pdf

Single carburettor (Stromberg)

Removal 30

Dismantling 31,32

Cleaning 32,33

Assembly 33-35

Refitting 36

File 4 4_Stromberg_twin.pdf

Twin carburettors (Stromberg)

Removal 37,38

Dismantling 38-40

Cleaning and assembly 40

Refitting 41

File 5 5_Pierburg_single.pdf

Single carburettor (Pierburg)

Removal 42,43

Dismantling 44

Cleaning, Assembly 45-48

Refitting 48,49

File 6 6_Misc.pdf

Changing the adjusting screw

in the vacuum piston (Stromberg) 49,50

Checking and replenishing damper oil 51

Changing the jet 52,53

Basic setting of metering needle 53

Temperature compensator (Stromberg) 54,55

Choke modulator (Stromberg) 56

Checking the modulator

valve and hose (Pierburg) 56

Float chamber vent valve 57,58

Idling shut-off 59

File 7 7_Troubleshooting.pdf

Engine run-on 60

 

Checking and adjusting

Choke (twin carburettors) 60

Fast idling (Stromberg) 60

Choke control (Pierburg) 61

Fast idling, Choke (Pierburg) 62

Basic setting of needle (Stromberg) 63

Checking the needle (Pierburg) 64

Synchronization of twin carburettors 64

File 8 8_CO_setting.pdf

CO setting (Stromberg) 65-69

CO setting (Pierburg) 69-72

Fault diagnosis-high CO value 72,73

Adjusting screws (twin carburettors) 73,74

Choke cable 74,75

File 9 9_etc.pdf

Vapour trap 76,77

 

Induction system

Checking the preheater butterfly (-1985) 78,79

Checking the preheating system (1986-) 80

Changing the bimetallic valve 80

 

Fuel system

Removal 81

Refitting 81

Cleaning the fuel filter 82

 

Fuel tank and fuel lines

Removal of tank 83,84

Refitting of tank 84

Fuel lines 85

Replacing fuel lines inside car 86

HArry, :-)